Define Instruments WM-FLO Flow rate controller
Stock Code:
SKU: product options
This controller is suitable for a variety of flow and dual totaliser applications, and accepts inputs from industrial pulse and frequency flow sensors.
It comes in a convenient, wall mountable enclosure for hassle-free installation.
- 5 buttons, 4 status LED’s
- High-res LCD display with green backlight, 2 x 16 digits
- Transparent dust cover (not shown in image)
- IP65 dust and splash-proof
- Wall mountable case
185 x 235 x 119mm (H x W x D)
The Texmate WM-FLO Flow rate controller features:
- AC (0-30V) or DC (0-24V) input signal
- NPN, PNP, TTL, mag, digital, closed contact or namur sensors
- Input signal averaging on the rate
- Ready-to-hang display case, no panel cutouts required
- Dual alphanumeric LCD display rows
- Simple, intuitive interface with scrolling text prompts
- Variety of advanced features, including: user programmable input functions, batching, volumetric pulse, in flight adjustment, setpoint latching and startup inhibit
- Security PIN protected setup
Input signal | 0-24V DC, 0-30V AC |
| Sensor types | NPN, PNP, mag, TTL, digital, closed contact, namur |
| Noise filtering | 0.2, 2, 20kHz or Off |
| Excitation | 24V DC (50mA max) |
Frequency | 2Hz to 10KHz |
| K factor ranges | 0.1 to 99.9999, 999.999 or 9999.99 |
| Accuracy | 0.005% |
Temp drift | Typically 2ppm/°C |
| Relay outputs | 8 x 5A form A |
- Optional - | |
| Analog output | Isolated 16-bit 4-20 mA or 0-10V output |
| Serial port | Front panel isolated RS232/485 |
Below is a list of tags that have been applied to this product. Clicking on a tag will display a list of all products with that tag applied.